Up for sale,
Winona Van Norman PH 4000 guide and seat machine, Some seat and guide tooling (enough to do the common stuff), with two head fixtures. We used this machine with our BHJ Lifter Tru tooling (hence the reason we had two head fixtures, one is broke down right now and used for the air float setup) BHJ Lifter Tru not included (YET). Very nice with little use.
Gorton Mastermil 1-22 (bridgeport style) Step pulley with Sony DRO. Comes with 2 sets of collets and clamp kit.
Serv Equip Boring bar and HD table. Equipment rep says the boring bars are not very desirable but the table is. Any how, it bores nice, straight holes.
Sunnen CRG-750 Cap grinder, (Old style clamp) Needs new wheel.
We just purchased a Rottler F65M is the reason for the sale.
Prices and pictures to come, right now we are cleaning the machines and taking inventory of what is included to determine the pricing. If any body is interested in anything specific, PM me and I will get you some detailed pictures and pricing.
Thanks
Josh
Action Engineering Inc
Mill, Guide and Seat machine, Boring Bar, etc
Moderator: Team
-
- Member
- Posts: 98
- Joined: Sun Aug 05, 2007 11:55 pm
- Location: Minnesota
Mill, Guide and Seat machine, Boring Bar, etc
Performance engines are a science, no question is answered until proven.
-
- Member
- Posts: 98
- Joined: Sun Aug 05, 2007 11:55 pm
- Location: Minnesota
Re: Mill, Guide and Seat machine, Boring Bar, etc
Still have the boring bar and stand. Open to offers
Performance engines are a science, no question is answered until proven.
Re: Mill, Guide and Seat machine, Boring Bar, etc
Do you have any pictures of that boring stand?
I'm assuming the mill is gone?
Mm
I'm assuming the mill is gone?
Mm
-
- Member
- Posts: 98
- Joined: Sun Aug 05, 2007 11:55 pm
- Location: Minnesota
Re: Mill, Guide and Seat machine, Boring Bar, etc
e-mail address? My pictures are too big for speedtalk and Im to computer iliterate to get them posted
Performance engines are a science, no question is answered until proven.
Re: Mill, Guide and Seat machine, Boring Bar, etc
pics of the boring bar and stand. how much for both?
also of the cap grinder
acemcguire@msn dot com
also of the cap grinder
acemcguire@msn dot com
-
- Guru
- Posts: 1100
- Joined: Sun Jul 22, 2007 6:11 pm
- Location: NEBRASKA
- Contact:
Re: Mill, Guide and Seat machine, Boring Bar, etc
How about that BHJ Lifter True, that for sale?
Nick Smithberg
http://www.smithbergracing.com
http://www.smithbergracing.com