- 2 sets of 441 SBC Heads 1.94/1.50 Valves, 75cc chambers can be milled down. New Z-28 Springs. heads were ran 2 night on a pure stock. ready to bolt on. 200.00 obo
- 882 SBC Heads 1.94/1.50, 76cc Chamber, Ready to bolt on. Z-28 Springs, not cracked were checked, heads worked great when we ran them. intake port matched. 175.00obo
- Comp Cams Thumper Cam (12-601-4), new in the box. comes with Hyd lifters. Lift - .490INT/.475EXH Lobe Sep - 107* Dur @ .050 235INT/249EXH - 125.00obo
- Howards (110091) .410INT/.410EXH Lift, 242INT/242EXH Dur @ .050, 106* Lobe Sep. ran the same cam in my pure, worked awesome! - 75.00obo
- Engine Pro Camshaft Brand New MC1713 MC1713 HYD 223/223 Dur @ .050 .447INT/.447EXH Lift L-79 Corvette Cam Copy 50.00 obo
- GM Aluminum Intakes, one Camaro and one Corvette Intakes, one unknown aluminum intake but is GM cast aluminum SBC 50.00 obo each
- GM Cast Iron Non-EGR intake ready to run SBC 75.00 obo
- GM Cast Iron 2bbl Intake needs to be cleaned up 30.00 obo
- Turbo 350 Long tail Trans, Fresh rebuilt by Leons in Lansing 250.00 obo
- 2.56 7.5 inch Rear End Gear with Carrier 125.00 obo
- 2.41 Rear End gear for 7.5 inch with carrier 125.00 obo
- 2.73 Rear end gear, Richmond Gear 7.5 inch with carrier 140.00 obo
- 3.23 Rear End Gear, Gear only at this point may have carrier 75.00 obo
- Q-Jet Tuning Kit, Rods, Hangers, Jets, Needle and seats, etc... 50.00 obo
- GM 400 Crank, Nitrated for hardness, may require a quick polish - 150.00 obo
- Oldsmobile 6.0inch Rods machined and bushed for full floating pins and use on SBC, shot-peened and stress relieved. complete with new ARP rod bolts never installed or used - 150.00 obo
I've got a lot of other stuff and will be updating throughout the week, i have many metric, full size and so on control arms, spindles, center links, steering boxes, and so on. if your looking for something message or call me, i might just have it.
Also have a set of 041 heads that i may sell but i'm judging interest in them, complete heads on current motor.
All Parts are located just outside of lansing michigan. All prices are best offer, i might be off on some of the prices so if i'm way off in left field just shoot me a fair offer.
Buyer responsible for pickup or shipping
i do accept paypal, but please be prepared to add 3% due to paypal fees.
Cash or Paypal, all money to be USD.
For any Questions please PM me here or email me, flyingfourteen@aol.com
Thank you!
Small Block Chevy Parts, and chevy race parts
Moderator: Team
Re: Small Block Chevy Parts, and chevy race parts
I emailed & PM'd you about the Qjet parts & no reply, so I guess you don't want to sell too bad.
Jim
Re: Small Block Chevy Parts, and chevy race parts
My apologies for the lack of response, been sick for a week and then raced. the Q-Jet parts were picked up locally the day i listed them, i forgot to pull them off of here though.