SBC Build Part out

[peej410]

AFR 195 Elminator with 200# springs and Ti retainers $1700 for solid roller (have original valve train) and can sell at discount
Jesel Sportsman for AFR Eliminators $750
Keith Dorton Holley Manifold $200
Eagle 6.0 Featherweight Rods $300
Scat 48 lb Forged Crank $400 (minor scuffing, needs polish)
Billet Solid Roller Camshaft .610 gross lift good for 500hp at 7k
Morel Pressure fed Solid roller lifters $350
Brand new never used 950HP bodied Holley. Custom for this exact setup. 1:1 linkage Annular boosters built by Troy Patterson.
New Melling Oil pump and pickup Stock.

All used parts have exactly 308miles on them.
Rods still have pistons on them. Can be removed prior to purchase.
Motor has block issue. Swapping to LS series motor. Email for quote on package deal. This setup will do 8000rpm and 500hp all day long.
Extensive time was spent optimizing valvetrain geometry for maximum lift and least wear.

Cam and all valvetrain sourced through Chris Straub.

Will trade all for low mileage LS6 or LS2.

[peej410]

Also, I am flexible on prices. Liquidating this thing is the last thing I wanted to do. I would consider any reasonable offers.

[gg68camaro]

please email pics and part # on the jesel shaft rockers
ggbone@comcast.net

[peej410]

GG68 you have mail

I wanted to add a few more parts to the list.

6.325 ATI Super Damper. Sadly this damper is scratched. I had a friend helping me out to install adjustable timing pointer. He didnt realize the pointer was touching the damper. The friction got the damper kind of hot. I didnt notice any down sides other than the anodizing changing color slightly. Make an offer for this part.

Ram Billet Steel Flywheel (2pc rear seal) 153tooth $175
Ram Clutch balanced zero with rotating assembly and matched to flywheel.