WTB Ford pulley

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
terolx
New Member
New Member
Posts: 9
Joined: Tue Jun 02, 2015 6:25 pm
Location:

WTB Ford pulley

Post by terolx »

In desperate need of a serpentine belt water pump pulley for a 1993 E-350 van, 460 engine. Appx. 5 1/2 in. diameter x 2 1/4 in. wide. Has provisions for 2 belts however only the inner belt is used. The center came out in many pieces so I have no idea of the offset.

Terry
PackardV8
Guru
Guru
Posts: 7629
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: WTB Ford pulley

Post by PackardV8 »

I'll ask my tear-down guy if he can remember where he threw the last one.

Are we sure the 1993 E-350 van is different than the trucks?
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
terolx
New Member
New Member
Posts: 9
Joined: Tue Jun 02, 2015 6:25 pm
Location:

Re: WTB Ford pulley

Post by terolx »

Thanks for the reply Jack. I do not know what it interchanges with,but, I would think it to be the same as an F series.
terolx
New Member
New Member
Posts: 9
Joined: Tue Jun 02, 2015 6:25 pm
Location:

Re: WTB Ford pulley

Post by terolx »

FOUND!
Post Reply