361ci RHS RAISED RUNNER STEELHEAD ENGINE

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
perfconn
Member
Member
Posts: 140
Joined: Wed Nov 04, 2009 9:07 am

361ci RHS RAISED RUNNER STEELHEAD ENGINE

Post by perfconn » Thu Dec 17, 2015 9:30 pm

Dart Little M block-4.175 bore-50mm cam tunnel
Winberg billet crank-3.290 stroke
Pankl 6 inch honda journal rods
New Pankl rod bolts
New Del West titanium 11/32-2.100 valves
New Del West titanium 11/32-1.600 valves
New HVH ported Edelbrock intake
New HVH ported RHS raised runner steel heads-336cfm @.700
New Jesel .937 keyway DLC coated lifters & bushings
New Comp Cam billet 50mm roller cam
New T&D 1.90-1.85 shaft rockers
New PSI 1243 springs
New Manley titanium retainers
New CV 3/8 pushrods
New CV Products billet fuelpump
Moroso billet distributor
New MSD crank trigger
New Scott plugwires
New JE 4cc dome pistons
New .867 DLC coated 2.500 wristpins
New ATI balancer
New Champ aluminum drysump oilpan w/3 #12 pickups
New Champ fabricated aluminum valve covers
New timing cover
New Cloyes hexajust timing set
New waterpump & pulleys
New ARP head studs
533.2 # torque @ 5700 rpm
693.6 hp @ 7400 rpm
Fresh off dyno-$16,500.00
Pictures & dyno sheet available by email
E-mail: terry.marciaburnett@gmail.com
Phone: 865-567-6943

perfconn
Member
Member
Posts: 140
Joined: Wed Nov 04, 2009 9:07 am

Re: 361ci RHS RAISED RUNNER STEELHEAD ENGINE

Post by perfconn » Wed Feb 24, 2016 10:12 pm

Lots of pictures were taken as engine was assembled.Pictures and dyno sheet available by email. :D

perfconn
Member
Member
Posts: 140
Joined: Wed Nov 04, 2009 9:07 am

Re: 361ci RHS RAISED RUNNER STEELHEAD ENGINE

Post by perfconn » Mon Mar 28, 2016 3:37 pm

Price dropped to $16,000.00

Post Reply