wtd mopar rods 6.76 1.09 pin

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
526 turbo
Member
Member
Posts: 186
Joined: Sun Nov 29, 2009 11:54 am
Location: neche, nd

wtd mopar rods 6.76 1.09 pin

Post by 526 turbo » Sun May 22, 2016 1:39 pm

Hi looking for some good used rods for mopar big block must be 1.09 pin hole. Please ema :mrgreen: il me 71mervin@gmail.com thx

BradH
Expert
Expert
Posts: 502
Joined: Wed Apr 03, 2013 11:34 am

Re: wtd mopar rods 6.76 1.09 pin

Post by BradH » Sat Jun 04, 2016 11:19 am

If the OP is still looking, he'll probably have better luck sourcing parts for Mopars by joining moparts.com and posting adds on the BB Engine Parts Wanted or Race Parts Wanted sections.

ProPower engines
Guru
Guru
Posts: 6864
Joined: Sun Jan 21, 2007 1:16 pm
Location: VICTORIA BC CANADA

Re: wtd mopar rods 6.76 1.09 pin

Post by ProPower engines » Mon Jun 06, 2016 2:17 am

526 turbo wrote:Hi looking for some good used rods for mopar big block must be 1.09 pin hole. Please ema :mrgreen: il me 71mervin@gmail.com thx

What journal size are you working with??

H beam or I-beam rod??
Real Race Cars Don't Have Doors

526 turbo
Member
Member
Posts: 186
Joined: Sun Nov 29, 2009 11:54 am
Location: neche, nd

Re: wtd mopar rods 6.76 1.09 pin

Post by 526 turbo » Mon Jun 06, 2016 2:20 am

Standard mopar journal size and either j beam or i beam thx

ProPower engines
Guru
Guru
Posts: 6864
Joined: Sun Jan 21, 2007 1:16 pm
Location: VICTORIA BC CANADA

Re: wtd mopar rods 6.76 1.09 pin

Post by ProPower engines » Mon Jun 20, 2016 11:33 pm

For the cost just but new rods!!
Scat has some good rods and they are not expensive.I just got a set for a 440 and they were very reasonable in cost compared to resizing someone else's junk.
Real Race Cars Don't Have Doors

Post Reply