Page 1 of 1
wtd mopar rods 6.76 1.09 pin
Posted: Sun May 22, 2016 1:39 pm
by 526 turbo
Hi looking for some good used rods for mopar big block must be 1.09 pin hole. Please ema
il me
71mervin@gmail.com thx
Re: wtd mopar rods 6.76 1.09 pin
Posted: Sat Jun 04, 2016 11:19 am
by BradH
If the OP is still looking, he'll probably have better luck sourcing parts for Mopars by joining moparts.com and posting adds on the BB Engine Parts Wanted or Race Parts Wanted sections.
Re: wtd mopar rods 6.76 1.09 pin
Posted: Mon Jun 06, 2016 2:17 am
by ProPower engines
526 turbo wrote:Hi looking for some good used rods for mopar big block must be 1.09 pin hole. Please ema
il me
71mervin@gmail.com thx
What journal size are you working with??
H beam or I-beam rod??
Re: wtd mopar rods 6.76 1.09 pin
Posted: Mon Jun 06, 2016 2:20 am
by 526 turbo
Standard mopar journal size and either j beam or i beam thx
Re: wtd mopar rods 6.76 1.09 pin
Posted: Mon Jun 20, 2016 11:33 pm
by ProPower engines
For the cost just but new rods!!
Scat has some good rods and they are not expensive.I just got a set for a 440 and they were very reasonable in cost compared to resizing someone else's junk.