BBC 565 rotating assembly
Posted: Thu Jun 02, 2016 8:03 pm
I have the 565 rotating assembly out of my 2015 engine masters engine. Approximately 100 dyno pulls on the rotating assembly. Nothing wrong with the stuff, just upgrading components. Rods are piston guided and comes with total seal gapless rings. I wouldn't hesitate to reuse the rings and rod bearings. $1500 plus shipping FIRM!
-Diamond gas ported pistons (conventional cylinder heads BBC)
4.600 bore
1.29 compression height
+19.3cc
-Total seal Gapless top, Napier second .043/ .043/ 3mm ring pack
-Scat H-beam rods
-Scat 4340 crankshaft
-Diamond gas ported pistons (conventional cylinder heads BBC)
4.600 bore
1.29 compression height
+19.3cc
-Total seal Gapless top, Napier second .043/ .043/ 3mm ring pack
-Scat H-beam rods
-Scat 4340 crankshaft