NOS Ford Motorsport R302 Block

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
engineman1
New Member
New Member
Posts: 3
Joined: Thu Aug 16, 2012 4:55 am

NOS Ford Motorsport R302 Block

Post by engineman1 » Fri Aug 19, 2016 2:21 am

I have a NOS Ford Motorsport R302 block that I've been holding on to for some years for a spare or new project. I wanted to know if there was any interest in these blocks anymore? I know they are rare and the new Boss blocks are crap, but with the Dart and World Products offerings I didn't know if there would be any interest. It's just a shame sitting there not being put to use. Thanks everyone for your input / advice.

ClassicComp
Expert
Expert
Posts: 845
Joined: Mon Jan 23, 2006 10:50 pm

Re: NOS Ford Motorsport R302 Block

Post by ClassicComp » Sat Aug 20, 2016 1:59 pm

I'm interested, Deck hgt? Main Ø,location? Cost Please?
results speak for themselves
BobF

engineman1
New Member
New Member
Posts: 3
Joined: Thu Aug 16, 2012 4:55 am

Re: NOS Ford Motorsport R302 Block

Post by engineman1 » Sat Aug 20, 2016 3:11 pm

ClassicComp, Thanks for your interest. Location is North New Jersey, Deck Height is 8.200 Std 302 height. Cost I don't know. I paid $1700.00 for it when I bought just when they discontinued it. My question is I do not know since they have been discontinued if theres a demand for them in certain regulations of racing?
Mario

ClassicComp
Expert
Expert
Posts: 845
Joined: Mon Jan 23, 2006 10:50 pm

Re: NOS Ford Motorsport R302 Block

Post by ClassicComp » Sun Aug 21, 2016 10:41 am

Rough bore size?
results speak for themselves
BobF

engineman1
New Member
New Member
Posts: 3
Joined: Thu Aug 16, 2012 4:55 am

Re: NOS Ford Motorsport R302 Block

Post by engineman1 » Sun Aug 21, 2016 9:55 pm

I haven't measured this block but the others I bought prior to this were usually 3.990 or so. I am on vacation now but can measure it when I get back if you need.
Mario

ClassicComp
Expert
Expert
Posts: 845
Joined: Mon Jan 23, 2006 10:50 pm

Re: NOS Ford Motorsport R302 Block

Post by ClassicComp » Tue Oct 04, 2016 7:06 am

Pm me cost of block please
results speak for themselves
BobF

Post Reply