Page 1 of 1
Wanted SBC Alum Block
Posted: Sun Dec 18, 2016 11:14 pm
by ALKYAL
I am looking for a Used [Not Used-Up] Alum SBC Bare Block. 400 size mains. 9.00 deck ht. Cam bearings can be Roller or Std.Block may need new liners, but prefer no Weld Repairs. Raised cam or Std cam location. Steel Caps [NO Titanium] NO Lt. Weight Brodix Sprint blocks. Donovan is First choice. Hope someone has one in their Shop that customer has not picked-up. Lots of JUNK on Racing Junk and E-bay. Thanks Al
Re: Wanted SBC Alum Block
Posted: Fri Dec 30, 2016 1:49 am
by Adger Smith
Al. If you need a block give me a call.
Re: Wanted SBC Alum Block
Posted: Sun Feb 05, 2017 8:23 pm
by cv67
Al curious what would something what like this run that could use more than 3.75 stroke 9.deck reg old cam or???
Curious pm please
Wondering if a working (actullay not but-_ could afford this. what I wanted to do yrs ago machinist talked m eout of it. Idiot proofing you know
-Idiot that wants one anyway
Re: Wanted SBC Alum Block
Posted: Sun Feb 05, 2017 10:12 pm
by Adger Smith
When Al decides if he wants my 2 Alum blocks I'll let you know a price.
Adger Smith Performance Engines
903 824 4924 cell
903 794 7223 shop
adgersperf@ aol.com