Wanted- Holley 390 Double Pumper

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
rothian717
New Member
New Member
Posts: 1
Joined: Wed Jan 11, 2017 7:47 pm

Wanted- Holley 390 Double Pumper

Post by rothian717 » Sat Jan 14, 2017 1:53 pm

Looking for a used Holley 0-80507, which is the 390cfm double pumper. it is going on a 2.8L nissan. It does not have to be new or rebuilt, it just has to be a rebuildable core at the very least.

A knock-off/ oem with the holley bolt pattern will also work.

Thank You,
Ian

PackardV8
Guru
Guru
Posts: 5039
Joined: Sun Jul 30, 2006 2:03 pm

Re: Wanted- Holley 390 Double Pumper

Post by PackardV8 » Sat Jan 14, 2017 3:20 pm

Can you use an additional 50# of Holley parts along with it? I haven't done one in years and it's time to clear the shelf. IIRC, there's a plastic compartment box with jets, springs, pump cams, pumps and misc, plus bodies, bowls and at least one good 390. I will have to confirm it's a double pumper. Been so long, memory isn't clear on that.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering

Post Reply