Don Terrill’s Speed-Talk

Looking for a used Holley 0-80507, which is the 390cfm double pumper. it is going on a 2.8L nissan. It does not have to be new or rebuilt, it just has to be a rebuildable core at the very least.

A knock-off/ oem with the holley bolt pattern will also work.

Thank You,
Ian

Can you use an additional 50# of Holley parts along with it? I haven't done one in years and it's time to clear the shelf. IIRC, there's a plastic compartment box with jets, springs, pump cams, pumps and misc, plus bodies, bowls and at least one good 390. I will have to confirm it's a double pumper. Been so long, memory isn't clear on that.