Nascar Ford 9 inch center section for sale.....
Posted: Fri Jun 23, 2017 2:57 pm
This is a Roush/Fenway take out Center section out of a Daytona speedway car. 4.00 ratio special coated ring and pinion gear, Nascar spec Detroit Locker with 31 splines, steel main caps and billet 1350 style pinion yoke. All hardware and prep is top line!
Used for 6 months in my 427 Mustang LX but the 4.00 is bit too low a gear for my use.
Very clean and good condition unit for street and strip use if you don't mind the clickty click going around corners.
I 'm now running a similar 3.50 ratio unit.
$ 700 takes it!
Used for 6 months in my 427 Mustang LX but the 4.00 is bit too low a gear for my use.
Very clean and good condition unit for street and strip use if you don't mind the clickty click going around corners.
I 'm now running a similar 3.50 ratio unit.
$ 700 takes it!