I'm looking for a set of aluminum heads for my 350 SB Chevy. I'm only looking at making 400hp, and won't be turning it over 6,000rpm, so I don't need anything big. This will be going in a boat, but it won't see salt water, so that's not an issue.
Would like to trade a new custom cam(or 2) as partial payment.
Wanting to trade camshaft(s)+$$ for Alum SBC heads
Moderator: Team
Wanting to trade camshaft(s)+$$ for Alum SBC heads
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads
Mike
Check out Speedway motors. They have a line of decent aluminum heads available that will work great for boat engines.
I have used several sets for lake boats on both 350 and 383 engines with great success. They make good power with the post sizes available decent quality valves etc. but they only come 64 cc which is not an issue if you don't have pistons yet.
May be worth a look
Dave C
Check out Speedway motors. They have a line of decent aluminum heads available that will work great for boat engines.
I have used several sets for lake boats on both 350 and 383 engines with great success. They make good power with the post sizes available decent quality valves etc. but they only come 64 cc which is not an issue if you don't have pistons yet.
May be worth a look
Dave C
Real Race Cars Don't Have Doors
Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads
I'll take a look.
Thanks
Thanks
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
-
- Guru
- Posts: 1605
- Joined: Sat Dec 24, 2011 10:02 am
- Location: melfort saskatchewan Canada
Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads
in a slightly unrelated question. Are there any used cam cores that you look for or buy? I have a wrecking yard with about 150 vehicles.
Brian
Brian
The Word of God is quick and powerfull
www.therocketshop.blogspot.com
www.therocketshop.blogspot.com
Re: Wanting to trade camshaft(s)+$$ for Alum SBC heads
The only used cams we regrind are for the GM 602,603, and 604 crate engines, but I doubt you'll find many of those.prairiehotrodder wrote:in a slightly unrelated question. Are there any used cam cores that you look for or buy? I have a wrecking yard with about 150 vehicles.
Brian
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449