Page 1 of 1

Sbc Solid Roller, Super Victor Intake, Converter

Posted: Tue Aug 08, 2017 7:12 am
by wilson1970
I have a Comp Cams .630 lift 264/268@.050 110 LC solid roller with Comp lifters. New. I installed in engine and Never started. $500
SBC Super Victor 2925 bolted on engine and never ran. $250
Transmission specialties super 8. 9" converter 500 street miles behind a SBC. Really nice converter. $600

Re: Sbc Solid Roller, Super Victor Intake, Converter

Posted: Fri Sep 08, 2017 5:24 pm
by wilson1970
wilson1970 wrote:I have a Comp Cams .630 lift 264/268@.050 110 LC solid roller with Comp lifters. New. I installed in engine and Never started. Also have dual matching springs from Comp. :hello2: $500
SBC Super Victor 2925 bolted on engine and never ran. $250
Transmission specialties super 8. 9" converter. Really nice converter. $600

Re: Sbc Solid Roller, Super Victor Intake, Converter

Posted: Sat Sep 09, 2017 12:20 pm
by 77cruiser
What's the stall of the converter?

Re: Sbc Solid Roller, Super Victor Intake, Converter

Posted: Sun Sep 10, 2017 10:45 am
by wilson1970
Behind my 355 with a .256/.264@.050 camshaft with 4.10 rear gear It would flash at 4200. I really enjoyed driving the car with this converter.

Re: Sbc Solid Roller, Super Victor Intake, Converter

Posted: Mon Sep 11, 2017 8:16 am
by 77cruiser
Wonder what it would flash with my 421 in a 4200 lb. car?
It's at 525 ft.lbs. @ 4200.

Re: Sbc Solid Roller, Super Victor Intake, Converter

Posted: Mon Sep 11, 2017 11:43 am
by wilson1970
Not sure there. Definitely more that my 355 small block. You could call Transmission specialties and ask them. This thing is barely used.

Re: Sbc Solid Roller, Super Victor Intake, Converter

Posted: Mon Sep 11, 2017 11:45 am
by wilson1970
I sent you a PM.

Re: Sbc Solid Roller, Super Victor Intake, Converter

Posted: Mon Sep 11, 2017 2:03 pm
by 77cruiser
wilson1970 wrote:I sent you a PM.
Didn't get it.

Re: Sbc Solid Roller, Super Victor Intake, Converter

Posted: Sat Oct 14, 2017 7:12 am
by wilson1970
Sbc sportman 11 cylinder heads. Manley 2.02 /1.60 street flow valves, ARP 7/16 studs, guide plates. Comp Solid roller springs. Have been ported do not have a any flow numbers. Springs were installed and never ran. Comp solid roller .630 lift .264/268@.050 with Comp lifters. Will sell as a package deal. Cam was installed and never started. $1500 OBO. Also still have brand new 2925 Super Victor Intake.

SBC Sportsman 11 heads, Solid Roller, Super Victor Intake

Posted: Sat Oct 14, 2017 9:07 am
by wilson1970
wilson1970 wrote:
Tue Aug 08, 2017 7:12 am
I have a Comp Cams .630 lift 264/268@.050 110 LC solid roller with Comp lifters. New. I installed in engine and Never started. $500
SBC Super Victor 2925 bolted on engine and never ran. $250
Transmission specialties super 8. 9" converter 500 street miles behind a SBC. Really nice converter. $600