Don Terrill’s Speed-Talk

I have a set of 9°,4.5 inch bore pitch Brodix CNC heads that I have been saving for a serious big inch build. With 2 years of work still in hand I doubt that I will get to use these heads. Other than aligning the edges of the chamber to the bore and finishing up the seats to your own spec these heads are ready to go. Can't remember the exact flow numbers but intake is somewhere around 400 and exhaust is about 245 without pipe. Combustion chamber has been updated to the latest form worth about 20 hp om an engine in the 800 HP range.

Asking $750 for the pair.

Terry Walters at Waltersengines.com (tel 540-774-8605) is handling the sale and shipping.
DV