Price Drop - New Victor Jr. Heads Ported By Mondello

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
enigma57
Guru
Guru
Posts: 1347
Joined: Sun Oct 07, 2007 11:59 pm
Location: Galt's Gulch

Price Drop - New Victor Jr. Heads Ported By Mondello

Post by enigma57 » Fri Aug 31, 2018 5:09 am

PRICE DROP - $2,000 + shipping - New Edelbrock Victor Jr. heads for small block Chevy with full portwork by Mondello. Never bolted on an engine.

If interested, please send PM. I am located NW of Houston, Texas.

Will ship parts within lower 48 states...... Payment by US Postal Money Order accepted.

If picking up parts locally, cash on receipt...... No checks, MOs nor credit cards if picking up locally.

All sales are final......


I had Mondello rework these 23 degree heads for a 427 stroker small block as an affordable alternative to 18 degree or 15 degree heads.

I asked Modello to port these heads so as to maximize flow at valve lifts below 0.550". I was looking for a flow rate for this engine of at least 300 cfm at that lift.

The specs Mondello gave me are as follows......

* Edelbrock Victor Jr. Aluminum Heads Fully Ported By Mondello Racing - 23 degree with standard valve spacing (no offset rockers required)

* 65cc Combustion Chambers, polished

* 2.08" intake X 1.60" exhaust valve sizes - Stainless Steel Pro-Flo with 5-angle valve job

* Intake Ports - 2.35" High X 1.40" Wide = 3.25 sq. in. cross section at port opening (allowing for rounded corners) - Pushrod pinch point measures 2.80 sq. in.


* Exhaust Ports - 1.65" High X 1.65" Wide = 2.68 sq. in. cross section at port opening (allowing for rounded corners)

* Dual Valve Springs Set @ 140 lb. seat pressure / 340 lb. open / cryogenic stress relieved

* P.C. Teflon Valve Guide Seals

Flow @ 28 in. (no pipe)

* LIFT INTAKE EXHAUST
0.100" 071.00 063.00
0.200" 145.00 113.00
0.300" 205.00 157.00
0.400" 260.00 190.00
0.500" 306.00 205.00
0.550" 313.00 211.00
0.600" 320.00 217.00


Best regards and thanks for your interest,

Harry

User avatar
k-star
Guru
Guru
Posts: 1900
Joined: Mon Oct 04, 2004 2:17 pm
Location: york pa

Re: Price Drop - New Victor Jr. Heads Ported By Mondello

Post by k-star » Wed Sep 05, 2018 12:32 pm

What state are you in?

Thank, Keith
“If I hit you with this you’re going to be numb, that’s why they call them numb-chucks “Si Robertson

enigma57
Guru
Guru
Posts: 1347
Joined: Sun Oct 07, 2007 11:59 pm
Location: Galt's Gulch

Re: Price Drop - New Victor Jr. Heads Ported By Mondello

Post by enigma57 » Thu Sep 06, 2018 6:39 am

Keith, I am in Texas. Just North of Houston. Where are you located? If you want them and are in lower 48 states, I am sure we can work out shipping.

Best regards,

Harry

User avatar
k-star
Guru
Guru
Posts: 1900
Joined: Mon Oct 04, 2004 2:17 pm
Location: york pa

Re: Price Drop - New Victor Jr. Heads Ported By Mondello

Post by k-star » Mon Sep 17, 2018 7:12 am

Sorry, been swamped with work. Can you PM me your phone number?


Thanks, Keith
“If I hit you with this you’re going to be numb, that’s why they call them numb-chucks “Si Robertson

enigma57
Guru
Guru
Posts: 1347
Joined: Sun Oct 07, 2007 11:59 pm
Location: Galt's Gulch

Re: Price Drop - New Victor Jr. Heads Ported By Mondello

Post by enigma57 » Wed Sep 19, 2018 7:31 am

Thanks for your interest, Keith! PM sent.

Best regards,

Harry

Post Reply