860 K-W Surfacer- Jamison CBN conversion
Posted: Sat Feb 05, 2011 10:50 pm
Selling my 860 to a fellow who is going to take it out of North America. I did the Jameson CBN conversion on it about 6 yrs ago. I dont do many blocks or heads so it doest have many miles on it. New owner is going to put the wet stone set-up back on it. { I kept all the parts and pcs to accomplish this] Trying to get sale price down a little for him, so I will sell the 16 in. Conversion if possible. The CBN disk has been rotatated /partially 4 times. Should have @ least 6-8 more moves left on it. Anyone on here interested in the CBN Conv. plate complete. I am sure you could re machine the register and/or the 4 bolt pattern to fit your machine. [bolts are 1/2-13 nc thread-thru holes only in the plate] Make a reasonable offer and you could own it. It weighs about 45/50 lbs-motor will coast down for approx. 7 min before it stops. 7.5 hp GE 3 phase. Please reply on here or PM me for further info. Thanks Al