Hey guys -
I'm in the market for a DCM Tech seat and guide machine, HM-2000L. I've seen quite a few of the smaller HM-2000's listed for sale, but I need the bigger one for doing work on tall inline flathead blocks.
Also, I'm looking for a small line honing mandrel for 1.800 - 2.100" diameters. The Sunnen part number is 10RY-1800F. Are there other companies that make mandrels that will work in a Sunnen machine?
Thanks for any leads!
Wanted: DCM and line hone mandrel
Moderator: Team
-
- New Member
- Posts: 3
- Joined: Tue Jan 10, 2012 9:32 pm
- Location: Lewistown, MT
- Contact:
Wanted: DCM and line hone mandrel
The Freewheeling Tony Smith
Gunsmith/Machinist/Engine Builder
712 9th Ave N
Lewistown, MT 59457
(406) 538-3197
http://www.fastfourspecial.com
https://www.facebook.com/thefreewheelingtonysmith
Gunsmith/Machinist/Engine Builder
712 9th Ave N
Lewistown, MT 59457
(406) 538-3197
http://www.fastfourspecial.com
https://www.facebook.com/thefreewheelingtonysmith
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Wanted: DCM and line hone mandrel
There is no other supplier for the line hone mandrels. Sunnen has that sealed up.
There is different brands of line hone machines but they use the sunnen mandrels and stones.
Danmar makes copies of the CR mandrels but I have never heard of them making line hone mandrel copies.
There is different brands of line hone machines but they use the sunnen mandrels and stones.
Danmar makes copies of the CR mandrels but I have never heard of them making line hone mandrel copies.
Real Race Cars Don't Have Doors