Looking for a line-boring jig for a model A ford

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
YOJIMI
New Member
New Member
Posts: 5
Joined: Sun Mar 04, 2007 10:49 pm
Location:

Looking for a line-boring jig for a model A ford

Post by YOJIMI »

Hello,
I have a line-bore machine , but need the jig used to align the boring bar in newly poured babbitt in the mains in Model A and B Fords, the machine that I have is a Serv-Equip {looks like a van-norman LB3200} I think the alignment jigs from a Tobin-Arp machine will work .These jigs fit into the cam bearing hole and rest on the oil pan rail, leaving a hole to place the boring bar in , or to indicate off of
thanks for looking
JIM
Post Reply