Unlike EJ and EDP models, the VIP armature/stone holder assy. is directly aligned with the valve guide axis
Also need stones from 1.00" (26mm) and pilots from 0.200" (5.0mm) - - can reduce larger stones, and if the pilot valve guide o.d is suitable can reduce or sleeve the stone holder o.d. to suit
Original VIP pilots are ~3 1/2" long with a threaded expanding collet at the "bottom" and radiused "top"; believe they then increase to a 7/16"od x ~3 1/4" long section which fits inside the grinder stone holder
PM including leads would be appreciated - - thanks for looking
WTB Hall-Toledo VIP seat grinder
Moderator: Team
-
- Pro
- Posts: 454
- Joined: Sat Jun 04, 2011 5:46 pm
- Location: Canada
-
- Member
- Posts: 96
- Joined: Fri Apr 06, 2007 4:59 pm
- Location: St. Charles, MO
- Contact: