shop closing equipment sale

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

shop closing equipment sale

Post by dcl » Tue Mar 03, 2015 1:57 pm

rottler f2mb boring bar w/ air float table
sunnen ck10d cyl hone/align hone machine.2 cyl honing heads ,4 align hone mandrels
sunnen plb-100 align boring bar w/ 350,400 sbc,454,340 chry,440 chry,455 pont,383/400 chry collars
kwikway 861 surfacer w/cbn pcd cutters
lb1499 rod/pin hone w/ag300 guage.comes with 7 rod mandrells and 34 pin mandrells
sunnen crh50k rod heater
sunnen crg-750 cap grinder
sioux small parts tumbler
8 torq plates.ford gm chrysler
can send pictures
email unlimited-engines@shaw.ca or lawler904@gmail.com
thanks dave

PackardV8
Guru
Guru
Posts: 5036
Joined: Sun Jul 30, 2006 2:03 pm

Re: shop closing equipment sale

Post by PackardV8 » Tue Mar 03, 2015 2:56 pm

Asking prices?
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

Re: shop closing equipment sale

Post by dcl » Tue Mar 03, 2015 6:50 pm

oops i better post that its kind of important

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

Re: shop closing equipment sale

Post by dcl » Tue Mar 03, 2015 6:59 pm

f2mb 7500
ck10d 15000
plb-100 2500
kwikway 861 7500
lbb1499 3500
crh 50k 350
soiux parts tumbler 350
crg-750 400
all prices obo.thanks
have pictures of everything if needed

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

Re: shop closing equipment sale

Post by dcl » Tue Mar 03, 2015 7:04 pm

also delta pressure test stand 4000 obo

P R S
New Member
New Member
Posts: 16
Joined: Fri Jan 03, 2014 1:11 pm
Location: Walters,ok

Re: shop closing equipment sale

Post by P R S » Tue Mar 03, 2015 11:33 pm

Could you send some pictures of the plb100 line bore to: Penrodracing@Martineer.net. Thanks Victor
Penrod Racing Services -Walters,Oklahoma--580-591-1947

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

Re: shop closing equipment sale

Post by dcl » Wed Mar 04, 2015 1:12 am

will send pictures in morning when i get to work
dave

buck
Expert
Expert
Posts: 550
Joined: Thu Mar 14, 2013 2:56 pm
Location: Detroit MI

Re: shop closing equipment sale

Post by buck » Wed Mar 04, 2015 8:09 am

Please send photos and details on the CK/align hone setup to bmrengines@gmail.com
BMR @ Facebook

PHANTASM
Member
Member
Posts: 105
Joined: Thu Aug 11, 2011 12:19 am
Location: minnesota

Re: shop closing equipment sale

Post by PHANTASM » Thu Mar 05, 2015 11:57 am

pics of plb100 please

sent pm with e-mail address

PHANTASM
Member
Member
Posts: 105
Joined: Thu Aug 11, 2011 12:19 am
Location: minnesota

Re: shop closing equipment sale

Post by PHANTASM » Sat Mar 07, 2015 11:11 am

pmd you yesterday and haven't heard back about the plb-100 set up.

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

Re: shop closing equipment sale

Post by dcl » Tue Mar 10, 2015 10:22 am

kwikway 861 and plb-100 sold

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

Re: shop closing equipment sale

Post by dcl » Tue Mar 24, 2015 2:30 pm

f2mb 7000
ck10d 14000
lb1499 3000
crg 750 400
delta pressure tester 2500
all prices canadian dollars,must go

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

Re: shop closing equipment sale

Post by dcl » Tue Mar 24, 2015 2:45 pm

also goodson prf-812 ring filer w /debur wheel like new 700.00
goodson pcp 1072 crankshaft polisher w/ belts 800.00

ebert
New Member
New Member
Posts: 21
Joined: Sun Mar 08, 2015 12:14 am

Re: shop closing equipment sale

Post by ebert » Tue Mar 24, 2015 8:55 pm

can you send pictures of rottler to ebertsengine@bellsouth.net

dcl
New Member
New Member
Posts: 34
Joined: Sat Jan 23, 2010 1:05 pm
Location: BC Canada

Re: shop closing equipment sale

Post by dcl » Wed Apr 01, 2015 7:44 pm

rottler boring bar sold

Post Reply