Thinking about selling whole shop... (Cylinder Heads)

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Tue Mar 10, 2015 11:12 pm

I went to the School of Automotive Machinists about 7-8 years ago and bought
Up this equipment to start a busniess just doing performance cylinder heads. I've gotten bored with
It and seeing if anyone is interested in all the equipment as a package deal.

2007 Sunnen DCM HMC 3000 cylinder head machining center.
All computerized with air floating table.
Does seat and guide work, surface heads, and with some added tooling
Surface and bore blocks.
Includes lots of tooling to do seat work on modular fords, LS, sbf, BBF, sbc, and most imports

2005 Superflow 600
Has berzinski fixture with several plates and bores
Flowcom
About 200-250 test valves of all sizes

IDL center valve grinder (just like a vr7000 sunnen)

And all my cylinder head porting equipment.
3 grinders (2 are pencil grinders like a jeweler would use the other
Is a Milwaukee)
About 50 burr bites
Cylinder head stands

Once again not looking to split this stuff up.
Package deal for everything $40k
Will entertain trades also...

Brian41
New Member
New Member
Posts: 23
Joined: Fri Aug 28, 2009 2:15 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by Brian41 » Wed Mar 11, 2015 1:19 pm

Can you send pics of equipment to brian@orlandiperformance.com

user-z68766209

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by user-z68766209 » Wed Mar 11, 2015 2:35 pm

Where are you located?

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Wed Mar 11, 2015 4:55 pm

Will get pics ASAP
Located near Fayetteville, AR

Brian41
New Member
New Member
Posts: 23
Joined: Fri Aug 28, 2009 2:15 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by Brian41 » Thu Apr 09, 2015 7:00 am

Still for sale ?

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Sun Apr 19, 2015 8:59 pm

Brian41 wrote:Still for sale ?
Yes I sent you another email

JoePorting
Guru
Guru
Posts: 2457
Joined: Mon Jun 14, 2010 3:16 pm
Location: Lake Elizabeth, CA

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JoePorting » Mon Apr 20, 2015 4:16 am

Probably get a better price and sell everything sooner if you just sell every individual item on ebay.
Joe Facciano

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Mon Apr 20, 2015 3:25 pm

JoePorting wrote:Probably get a better price and sell everything sooner if you just sell every individual item on ebay.
I'm sure your right, but I'm not paying eBay fees and
Don't want to deal with several different transactions.
(Don't have alot of free time on my hands to move the machines)

User avatar
nickmckinney
Guru
Guru
Posts: 1426
Joined: Fri Aug 01, 2008 11:21 pm
Location: Orlando
Contact:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by nickmckinney » Mon Apr 20, 2015 9:41 pm

JoePorting wrote:Probably get a better price and sell everything sooner if you just sell every individual item on ebay.
I gotta admit, I think Joe is right, thats a tough sell as a package IMHO especially considering the rarity of the Sunnen machine.

cstraub
Guru
Guru
Posts: 1063
Joined: Wed Feb 18, 2004 5:30 pm
Location: Tri-Cities, TN
Contact:

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by cstraub » Fri May 01, 2015 11:03 am

JRice wrote:Will get pics ASAP
Located near Fayetteville, AR
Sent you a PM.
Chris Straub
Performance Mfg.
http://www.straubtechnologies.com
www.distributorgears.com

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Sun May 03, 2015 6:06 pm

image.jpg



Lots of interest and offers.
I'm considering splitting it up.

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Sat Jun 06, 2015 11:34 am

I've had a lot of interest in spliting my machines
I will split them up once the sunnen machine is sold.

Price per machine are obo... Still listening to trade offers
(Drag cars, mustangs, ford lightning, guns, plasma table, etc)
Sunnen $28,000
Flow bench $7,000
IDL valve grinder $4,500
All my head porting tooling $500

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Sun Jul 12, 2015 12:26 am

Still listening to offers and trades.
Have a local machine shop friend looking/interested in a vgs-20
so I might trade for one if someone has one.

Other things Im interested in
Bridgeports, Lathes, and attachments, crank polisher,
Snap on tool box/tools, ford diesel 4x4 trucks 05-up,
Car hauler 18ft, in ground chassis Dyno, etc...

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Mon Aug 10, 2015 5:46 pm

Price drop on sunnen machine. Really would like to move this stuff.

JRice
New Member
New Member
Posts: 37
Joined: Mon Nov 05, 2012 11:14 pm

Re: Thinking about selling whole shop... (Cylinder Heads)

Post by JRice » Mon Aug 10, 2015 5:48 pm

Sunnen $25,000
Flow bench $7,000
IDL valve grinder $4,500
All my head porting tooling $500

Post Reply