OIL Pump For Sunnen 1810 Powerstroke Hone
Posted: Sun Dec 20, 2015 2:45 am
Hey guys
I am looking for a replacement oil pump for a 1810 power stroke hone.
The pump mounts to the drive motor with a collar style clamp and uses a tang/slot style drive.
If anyone has a replacement or suitable substitute please advise as this is a 2nd primary machine for doing large runs rods for stock type builds.
Thanks for your thoughts
Dave
I am looking for a replacement oil pump for a 1810 power stroke hone.
The pump mounts to the drive motor with a collar style clamp and uses a tang/slot style drive.
If anyone has a replacement or suitable substitute please advise as this is a 2nd primary machine for doing large runs rods for stock type builds.
Thanks for your thoughts
Dave