Buick 3.8 Torque/Honing Plate

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
User avatar
rcull
New Member
New Member
Posts: 37
Joined: Mon May 13, 2013 10:49 pm

Buick 3.8 Torque/Honing Plate

Post by rcull » Mon Dec 21, 2015 10:11 am

I am looking for a used Torque/Honing plate for a Buick 3.8.

Bore would be 3.8"+, with a bore spacing of about 4.250. Bolts would be about 4.250 x 3.100. Dimensions measured with my caliper.

jb55904
New Member
New Member
Posts: 14
Joined: Fri May 31, 2013 6:16 pm

Re: Buick 3.8 Torque/Honing Plate

Post by jb55904 » Tue Jan 19, 2016 2:39 pm

I have a plate for the 3.8 Buick engine that we built awhile ago. We don't use it anymore, it's steel and 1.5 inches thick with a cylinder bore of about 4.00. I'd sell this for $75.00 plus shipping. I am located in Rochester, MN.
Jim

Post Reply