Don Terrill’s Speed-Talk

I am looking for a used Torque/Honing plate for a Buick 3.8.

Bore would be 3.8"+, with a bore spacing of about 4.250. Bolts would be about 4.250 x 3.100. Dimensions measured with my caliper.

I have a plate for the 3.8 Buick engine that we built awhile ago. We don't use it anymore, it's steel and 1.5 inches thick with a cylinder bore of about 4.00. I'd sell this for $75.00 plus shipping. I am located in Rochester, MN.
Jim