Page 1 of 1
Dyno Room Mufflers and Ex. Fan Assy.
Posted: Wed Feb 17, 2016 11:17 am
by ALKYAL
All items are new. Have a Pr of Hospital Quiet 6in ID mufflers with 90s and flappers for ends. They were installed in a room, but never used. The 220V 3phase fan and outside rooftop deflector is the same unit that Super Flow Specs. in their Dyno Room. print. I believe its 1000 cfm. It was placed on a rooftop, but never used-other than to test for rotation. Asking 1800.00 for both items. Offers on either package will be considered.
Re: Dyno Room Mufflers and Ex. Fan Assy.
Posted: Sat Feb 20, 2016 8:51 pm
by ALKYAL
More muffler info- The Mufflers P/N JCS06-1260. 12 in OD X 6in ID. They are approx90 lbs each and are approx 68 ins long.There are mounting clamps and flange clamps. All items were purchased from.E M Products in Bloomington,Mn. 612-881-4008. The fan is from Granger. Will post that info soon.
Re: Dyno Room Mufflers and Ex. Fan Assy.
Posted: Sun Feb 21, 2016 10:53 pm
by putlove
Can I get some pic of everything.
jim@22reperformance.com
Re: Dyno Room Mufflers and Ex. Fan Assy.
Posted: Tue Feb 23, 2016 1:19 pm
by ALKYAL
I am working on pics. Hope to get them out by this Thurs.
Re: Dyno Room Mufflers and Ex. Fan Assy.
Posted: Wed Mar 23, 2016 7:29 pm
by Fast_Moto
I'd like to see some pics as well if these are still available.
Re: Dyno Room Mufflers and Ex. Fan Assy.
Posted: Thu Mar 24, 2016 1:03 am
by ALKYAL
They are avail along with a NEW-Never Used Stuska 1600 Hp 800-D dyno and stand. Have a member here who is trying to buy Dyno and the Fan-Mufflers. Will keep you posted here. Thanks for your interest.