WTB: Crank grinder

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
bubbabbc
Pro
Pro
Posts: 227
Joined: Sun Dec 23, 2007 9:22 am

WTB: Crank grinder

Post by bubbabbc » Wed Mar 09, 2016 4:33 pm

Wanted: AMC-Schou 1100 to 1500 crankshaft grinder. Must be in good condition, I do not want to rebuild the machine. Berco 225 would also be a consideration. Call Mike @ (315) 695-2454 Thanks

PackardV8
Guru
Guru
Posts: 5042
Joined: Sun Jul 30, 2006 2:03 pm

Re: WTB: Crank grinder

Post by PackardV8 » Wed Mar 09, 2016 5:59 pm

Would you have any interest in a Storm-Vulcan Model 15 if it were complete, working condition and less than $10,000?
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering

User avatar
Alan Roehrich
Guru
Guru
Posts: 2975
Joined: Tue Jul 04, 2006 5:58 pm
Location: Murfreesboro TN
Contact:

Re: WTB: Crank grinder

Post by Alan Roehrich » Wed Mar 09, 2016 10:37 pm

Jack, whatcha got?

PackardV8
Guru
Guru
Posts: 5042
Joined: Sun Jul 30, 2006 2:03 pm

Re: WTB: Crank grinder

Post by PackardV8 » Thu Mar 10, 2016 11:54 am

Storm Vulcan 15A on centers/y-drive
Arnold gauge
Stone dresser
Five loaded hubs and two new stones
Radius dresser
Two steady rests
Fully tooled and operational.

$9995 delivered to your door. Alan.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering

Adger Smith
Guru
Guru
Posts: 2139
Joined: Sun Jul 25, 2004 7:35 pm
Location: Texarkana, Ar-Tx

Re: WTB: Crank grinder

Post by Adger Smith » Wed Mar 23, 2016 6:27 am

I have a nice set of Chucks that will fit Jacks machine and replace the Y drivers. I also have a rebuilt drive motor.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail

Cummins Machinest
New Member
New Member
Posts: 13
Joined: Sat Feb 22, 2014 10:42 am
Location: Westminster Co.

Re: WTB: Crank grinder

Post by Cummins Machinest » Wed Mar 23, 2016 11:05 am

Adger Smith wrote:I have a nice set of Chucks that will fit Jacks machine and replace the Y drivers. I also have a rebuilt drive motor.
how much?

Adger Smith
Guru
Guru
Posts: 2139
Joined: Sun Jul 25, 2004 7:35 pm
Location: Texarkana, Ar-Tx

Re: WTB: Crank grinder

Post by Adger Smith » Wed Mar 23, 2016 12:03 pm

The rewired 3 phase drive motor & the chucks $500.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail

bubbabbc
Pro
Pro
Posts: 227
Joined: Sun Dec 23, 2007 9:22 am

Re: WTB: Crank grinder

Post by bubbabbc » Wed Mar 23, 2016 3:52 pm

The original post is all set, Mike found what he needs. But you guys can keep using the heading. Thanks

Skip

Post Reply