Free 10" face mill for cast iron heads

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
defrag010
Pro
Pro
Posts: 431
Joined: Fri Jun 16, 2006 10:41 pm
Location: River valley, AR
Contact:

Free 10" face mill for cast iron heads

Post by defrag010 » Sat Apr 02, 2016 4:13 pm

I have no need for it, but I figured some of you who are hungry enough will find this guy on facebook and hit him up.

Image

thomasmachine
New Member
New Member
Posts: 2
Joined: Fri Apr 22, 2016 10:20 am

Re: Free 10" face mill for cast iron heads

Post by thomasmachine » Fri Apr 22, 2016 12:09 pm

good morning im interested in the cutters im charlie and can be reach at 631-242=5665 thank you

racear2865
Guru
Guru
Posts: 1355
Joined: Mon Sep 21, 2009 11:58 pm
Location: tenn

Re: Free 10" face mill for cast iron heads

Post by racear2865 » Mon May 02, 2016 8:48 am

As I do machine quite a bit of cast iron, I would be interested in the Mill head. I dont want to step in front of any one but if no one else needs it---.
reed

User avatar
Dave Koehler
Guru
Guru
Posts: 3318
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: Free 10" face mill for cast iron heads

Post by Dave Koehler » Mon May 02, 2016 9:13 am

I think it is gone. I went looking at FB and it no longer shows on his page in the date range...or I went blind.
Dave Koehler - Koehler Injection
Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."

racear2865
Guru
Guru
Posts: 1355
Joined: Mon Sep 21, 2009 11:58 pm
Location: tenn

Re: Free 10" face mill for cast iron heads

Post by racear2865 » Mon May 02, 2016 1:03 pm

Dave Koehler wrote:I think it is gone. I went looking at FB and it no longer shows on his page in the date range...or I went blind.

Dave
We know the answer too that. HeHe.
reed

Post Reply