Page 1 of 1
Free 10" face mill for cast iron heads
Posted: Sat Apr 02, 2016 4:13 pm
by defrag010
I have no need for it, but I figured some of you who are hungry enough will find this guy on facebook and hit him up.
Re: Free 10" face mill for cast iron heads
Posted: Fri Apr 22, 2016 12:09 pm
by thomasmachine
good morning im interested in the cutters im charlie and can be reach at 631-242=5665 thank you
Re: Free 10" face mill for cast iron heads
Posted: Mon May 02, 2016 8:48 am
by racear2865
As I do machine quite a bit of cast iron, I would be interested in the Mill head. I dont want to step in front of any one but if no one else needs it---.
reed
Re: Free 10" face mill for cast iron heads
Posted: Mon May 02, 2016 9:13 am
by Dave Koehler
I think it is gone. I went looking at FB and it no longer shows on his page in the date range...or I went blind.
Re: Free 10" face mill for cast iron heads
Posted: Mon May 02, 2016 1:03 pm
by racear2865
Dave Koehler wrote:I think it is gone. I went looking at FB and it no longer shows on his page in the date range...or I went blind.
Dave
We know the answer too that. HeHe.
reed