WTB P-180 / Diamond Guide Hone

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Xlxbhorsepower
New Member
New Member
Posts: 8
Joined: Fri Oct 23, 2015 2:32 pm

WTB P-180 / Diamond Guide Hone

Post by Xlxbhorsepower » Mon May 23, 2016 11:59 am

Interested in finding a good used Goodson Diamond Guide Hone setup or a P-180 that is no longer being used if you've stepped up to the diamond.

I am a part time, 1 man shop that only does HD heads so looking for 7mm, 5/16 & 3/8. 99.9% of the time the 7mm setup would be used so the changeover time isn't a big concern, only do a couple sets a month.

If you have a good setup for a fair price give me a call before I call Goodson later this week

Thanks
Chad
803-260-4657

cpmotors
Expert
Expert
Posts: 873
Joined: Fri Feb 15, 2008 8:22 pm
Location: Janesville,Wi
Contact:

Re: WTB P-180 / Diamond Guide Hone

Post by cpmotors » Wed May 25, 2016 9:40 am

Hi Chad
How about a p-190 set? I don't have a 7mm mandrel for it though-
viewtopic.php?f=35&t=46306
Pete Graves
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills

PackardV8
Guru
Guru
Posts: 5036
Joined: Sun Jul 30, 2006 2:03 pm

Re: WTB P-180 / Diamond Guide Hone

Post by PackardV8 » Wed May 25, 2016 3:27 pm

I need something like this to hone 5/8" Studebaker Champion lifter bores. What are the differences between the P180 and P190.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering

Xlxbhorsepower
New Member
New Member
Posts: 8
Joined: Fri Oct 23, 2015 2:32 pm

Re: WTB P-180 / Diamond Guide Hone

Post by Xlxbhorsepower » Wed May 25, 2016 7:37 pm

Nothing different, the P180 is just the head unit vs the P-190 is the kit with 4 different size stones

Post Reply