Page 1 of 1

WTB P-180 / Diamond Guide Hone

Posted: Mon May 23, 2016 11:59 am
by Xlxbhorsepower
Interested in finding a good used Goodson Diamond Guide Hone setup or a P-180 that is no longer being used if you've stepped up to the diamond.

I am a part time, 1 man shop that only does HD heads so looking for 7mm, 5/16 & 3/8. 99.9% of the time the 7mm setup would be used so the changeover time isn't a big concern, only do a couple sets a month.

If you have a good setup for a fair price give me a call before I call Goodson later this week

Thanks
*
803-260-4657

Re: WTB P-180 / Diamond Guide Hone

Posted: Wed May 25, 2016 9:40 am
by cpmotors
Hi *
How about a p-190 set? I don't have a 7mm mandrel for it though-
viewtopic.php?f=35&t=46306

Re: WTB P-180 / Diamond Guide Hone

Posted: Wed May 25, 2016 3:27 pm
by PackardV8
I need something like this to hone 5/8" Studebaker Champion lifter bores. What are the differences between the P180 and P190.

Re: WTB P-180 / Diamond Guide Hone

Posted: Wed May 25, 2016 7:37 pm
by Xlxbhorsepower
Nothing different, the P180 is just the head unit vs the P-190 is the kit with 4 different size stones