Serv-Equip SE 2300 Power Stroke Hone for sale

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Diodedog
Member
Member
Posts: 58
Joined: Mon May 30, 2016 2:03 pm

Serv-Equip SE 2300 Power Stroke Hone for sale

Post by Diodedog » Sun Jul 31, 2016 7:40 pm

This hone is in very clean condition and works perfectly. It was upgraded with the Sunnen AN 275 honing head. It comes with 10 gallons of clean Goodson honing oil. I stepped into a great deal on a CK10 and unfortunately cant keep both. $3,000, located in Elysburg PA, PM or email for phone and more info, thanks, harpo3756@verizon.net .
Attachments
q2.jpg
q1.JPG

Frankshaft
Pro
Pro
Posts: 436
Joined: Sun Jul 05, 2015 6:01 pm

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by Frankshaft » Mon Aug 01, 2016 9:14 am

Your going to regret getting rid of that hone, and only have the ck-10.

Diodedog
Member
Member
Posts: 58
Joined: Mon May 30, 2016 2:03 pm

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by Diodedog » Mon Aug 01, 2016 8:42 pm

Frankshaft wrote:Your going to regret getting rid of that hone, and only have the ck-10.
Hi Frankshaft, You're right about that for sure, I'm not happy about it as I rarely sell anything but money is tight right now. I'm preparing one of my 2 homes for sale as we speak and until it's sold I have the financial burden of 2 homes on a single salary, plus a commitment on an 85B I'm supposed to pick up within the next month. I'll be retired in 5 months and will be opening shop then, I closed my last shop 12 years ago and said never again but retirement will allow me to take the jobs I'm interested in without having to work on junk to pay the bills. I prefer drag racing and some HP street engines with a focus on NHRA Stock and Superstock. Having a SF dyno will now allow me to take this to a level I couldn't achieve in the old shop.

MotionMachine
Guru
Guru
Posts: 1080
Joined: Thu Sep 16, 2010 10:01 am
Contact:

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by MotionMachine » Wed Aug 03, 2016 9:33 am

I sold my SE2300 when I bought a new CV616. Like Frank says, it didn't take long before I had to buy another one.

cnsperf
Member
Member
Posts: 170
Joined: Fri Nov 27, 2009 8:22 pm
Location: Roanoke Rapids, NC

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by cnsperf » Wed Aug 03, 2016 5:07 pm

MotionMachine wrote:I sold my SE2300 when I bought a new CV616. Like Frank says, it didn't take long before I had to buy another one.
Can either of you (MotionMachine or Frankshaft) expand on why you needed both?
Christopher Racing Engines
Roanoke Rapids, NC 27870
252-578-8273

MotionMachine
Guru
Guru
Posts: 1080
Joined: Thu Sep 16, 2010 10:01 am
Contact:

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by MotionMachine » Wed Aug 03, 2016 9:10 pm

If you just want to do a quick hone in used bores, the AN style stones are a little more forgiving in a tapered and/or out of round bore. And it's much faster. My SV10 only goes down to 2.750", there are occasions when I need to hone small bores and there are stones available that go down to 2.500".

cnsperf
Member
Member
Posts: 170
Joined: Fri Nov 27, 2009 8:22 pm
Location: Roanoke Rapids, NC

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by cnsperf » Wed Aug 03, 2016 9:24 pm

Okay. Reason I asked is I have a CHV31 and I am looking for a good CK10 or CV616. I don't plan on selling the CHV31 because I will continue to use it for line honing. I just wanted to make sure this was the right move to make. Looking forward to the power stroking, as my shoulders have gotten to the point where they don't tolerate honing as well as they used to.
Christopher Racing Engines
Roanoke Rapids, NC 27870
252-578-8273

MotionMachine
Guru
Guru
Posts: 1080
Joined: Thu Sep 16, 2010 10:01 am
Contact:

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by MotionMachine » Thu Aug 04, 2016 7:51 am

You're covered then if you keep the CHV. You'll go from tired shoulders to a tired left hand with the CK.

PHANTASM
Member
Member
Posts: 105
Joined: Thu Aug 11, 2011 12:19 am
Location: minnesota

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by PHANTASM » Wed Aug 10, 2016 11:12 pm

will you ship to terminal for pick up? and how do you accept payment?

Diodedog
Member
Member
Posts: 58
Joined: Mon May 30, 2016 2:03 pm

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by Diodedog » Thu Aug 11, 2016 11:32 am

PHANTASM wrote:will you ship to terminal for pick up? and how do you accept payment?
Yes I can ship Roadway Express Inc, send me your phone in a PM

Diodedog
Member
Member
Posts: 58
Joined: Mon May 30, 2016 2:03 pm

Re: Serv-Equip SE 2300 Power Stroke Hone for sale

Post by Diodedog » Fri Aug 26, 2016 11:41 am

The hone has been sold, thanks for the ad.

Post Reply