WTB: Kwik-Way SVS Chuck Disassembly Tool

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Cinnabar325is
New Member
New Member
Posts: 19
Joined: Fri Aug 05, 2016 5:20 pm
Location: Bechtelsville, Pennsylvania

WTB: Kwik-Way SVS Chuck Disassembly Tool

Post by Cinnabar325is » Sat Aug 06, 2016 12:08 pm

Looking to buy a chuck disassembly tool for an SVS. It is specific to the SVS and perhaps some of the other older KWs. The tool has a long rod, with a big wingnut on one end and a special cup on the other end to fit the chuck cap.

Want to clarify I do not need the disassembly tool for the SVSII, shown in the link here: http://www.kwik-way.com/store2/index.ph ... cts_id=554

Already have that tool and it isn't right for my machine in my understanding. Thanks!

Post Reply