WTB: Kwik-Way SVS Chuck Disassembly Tool
Posted: Sat Aug 06, 2016 12:08 pm
Looking to buy a chuck disassembly tool for an SVS. It is specific to the SVS and perhaps some of the other older KWs. The tool has a long rod, with a big wingnut on one end and a special cup on the other end to fit the chuck cap.
Want to clarify I do not need the disassembly tool for the SVSII, shown in the link here: http://www.kwik-way.com/store2/index.ph ... cts_id=554
Already have that tool and it isn't right for my machine in my understanding. Thanks!
Want to clarify I do not need the disassembly tool for the SVSII, shown in the link here: http://www.kwik-way.com/store2/index.ph ... cts_id=554
Already have that tool and it isn't right for my machine in my understanding. Thanks!