WTB Crankshaft polisher

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
theinsomniac
New Member
New Member
Posts: 1
Joined: Sun Sep 18, 2016 1:24 am

WTB Crankshaft polisher

Post by theinsomniac » Sun Sep 18, 2016 8:27 pm

Hello all I'm in need of a crankshaft polisher...or a hot line on a motor and rollers. I can make a frame at work from pics and designs I've found online. Thanks in advance. Cheers

jred
Pro
Pro
Posts: 252
Joined: Sun Jun 11, 2006 12:14 am
Location: tucson arizona
Contact:

Re: WTB Crankshaft polisher

Post by jred » Sun Sep 18, 2016 11:14 pm

I had a old quick-way polisher that was made with alum square tube and alum handles.. worked good but keep cracking at the welds I sold that and made a copy with light gauge tubing I made the rollers but they were available at Goodson this polisher uses a sewing machine motor that was from Grainger's and a on/off switch the only thing that took time to build was the brackets that clamp on the square tubing built this machine 25 plus years ago and polished a boatload of cranks the belt size is 1x70 but you can make it any size you want..

Post Reply