Wanted: Cylinder Honing Machine for Outboard Motors

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
TLSS
New Member
New Member
Posts: 5
Joined: Wed Oct 19, 2016 5:55 pm
Location: Southwest Missouri

Wanted: Cylinder Honing Machine for Outboard Motors

Post by TLSS » Fri Oct 21, 2016 1:34 pm

Looking for a cylinder honing machine for doing outboard motors.

Fordracer347
Pro
Pro
Posts: 321
Joined: Sat Nov 05, 2011 9:34 am
Location: Southwest Mo
Contact:

Re: Wanted: Cylinder Honing Machine for Outboard Motors

Post by Fordracer347 » Fri Oct 21, 2016 3:26 pm

Any AN style hone would work fine. For a number of years we had a manual stroke Axe machine.

Your only adaptation you'll need will be to trim the bottom of the stone head flush to the stones so you can get all the way to the bottom of the bores.
GPM Race Engines
Custom Machining, Dyno Service, Automotive & Marine
http://www.gpmraceengines.com
Facebook: https://www.facebook.com/pages/GPM-Race ... 8632920064
Twitter: @ GPMracengines

buck
Expert
Expert
Posts: 550
Joined: Thu Mar 14, 2013 2:56 pm
Location: Detroit MI

Re: Wanted: Cylinder Honing Machine for Outboard Motors

Post by buck » Sat Oct 22, 2016 3:53 pm

What state are you located in?
BMR @ Facebook

TLSS
New Member
New Member
Posts: 5
Joined: Wed Oct 19, 2016 5:55 pm
Location: Southwest Missouri

Re: Wanted: Cylinder Honing Machine for Outboard Motors

Post by TLSS » Sat Oct 22, 2016 5:41 pm

Located in Southwest Missouri

Post Reply