Wanted: Cylinder Honing Machine for Outboard Motors
Moderator: Team
Wanted: Cylinder Honing Machine for Outboard Motors
Looking for a cylinder honing machine for doing outboard motors.
-
Fordracer347
- Pro
- Posts: 321
- Joined: Sat Nov 05, 2011 9:34 am
- Location: Southwest Mo
- Contact:
Re: Wanted: Cylinder Honing Machine for Outboard Motors
Any AN style hone would work fine. For a number of years we had a manual stroke Axe machine.
Your only adaptation you'll need will be to trim the bottom of the stone head flush to the stones so you can get all the way to the bottom of the bores.
Your only adaptation you'll need will be to trim the bottom of the stone head flush to the stones so you can get all the way to the bottom of the bores.
GPM Race Engines
Custom Machining, Dyno Service, Automotive & Marine
http://www.gpmraceengines.com
Facebook: https://www.facebook.com/pages/GPM-Race ... 8632920064
Twitter: @ GPMracengines
Custom Machining, Dyno Service, Automotive & Marine
http://www.gpmraceengines.com
Facebook: https://www.facebook.com/pages/GPM-Race ... 8632920064
Twitter: @ GPMracengines
Re: Wanted: Cylinder Honing Machine for Outboard Motors
What state are you located in?
BMR @ Facebook