Page 1 of 1

Wanted: Cylinder Honing Machine for Outboard Motors

Posted: Fri Oct 21, 2016 1:34 pm
by TLSS
Looking for a cylinder honing machine for doing outboard motors.

Re: Wanted: Cylinder Honing Machine for Outboard Motors

Posted: Fri Oct 21, 2016 3:26 pm
by Fordracer347
Any AN style hone would work fine. For a number of years we had a manual stroke Axe machine.

Your only adaptation you'll need will be to trim the bottom of the stone head flush to the stones so you can get all the way to the bottom of the bores.

Re: Wanted: Cylinder Honing Machine for Outboard Motors

Posted: Sat Oct 22, 2016 3:53 pm
by buck
What state are you located in?

Re: Wanted: Cylinder Honing Machine for Outboard Motors

Posted: Sat Oct 22, 2016 5:41 pm
by TLSS
Located in Southwest Missouri