WTB CV616 feed control parts

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
ProPower engines
Guru
Guru
Posts: 6843
Joined: Sun Jan 21, 2007 1:16 pm
Location: VICTORIA BC CANADA

WTB CV616 feed control parts

Post by ProPower engines » Sat Nov 12, 2016 7:39 pm

Hey guys,
I am looking for the upper and lower feed pawls and the double eccentric for a CV-616 honing machine
Sunnen Part Numbers are as follows
CK255A upper feed pawl
CK-255A lower feed pawl
CK269A double eccentric

These are used to advance the feed of the stones while honing automatically so you don't have to hold the feed wheel and do it.
I have another machine I want to use for small honing jobs and need these to get it up and running again.

Any suggestions/ leads welcome
Thanks for looking

Dave
Real Race Cars Don't Have Doors

User avatar
CREngines
Guru
Guru
Posts: 1160
Joined: Tue Jun 01, 2010 3:56 am
Location: West PA, USA

Re: WTB CV616 feed control parts

Post by CREngines » Wed Nov 16, 2016 8:22 pm

I was able to source all that from sunnen with no issues fairly recently.
WD For Lucas Oil, Ferrea Valve, Callies, Racetec Pistons, VP Racing Fuel, and HVH Cylinder Heads.

Post Reply