Wanted 409 deck plate

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
User avatar
k-star
Guru
Guru
Posts: 1918
Joined: Mon Oct 04, 2004 2:17 pm
Location: york pa

Wanted 409 deck plate

Post by k-star »

Looking for a 409 / 348 deck plate that is used to bore the block on a 054 style boring stand.

All ready looked in the normal places, E-bay, machine dealers, Craigslist, etc.

Thanks, Keith
“If I hit you with this you’re going to be numb, that’s why they call them numb-chucks “Si Robertson
ec1
Member
Member
Posts: 159
Joined: Wed Dec 04, 2013 6:03 pm
Location:

Re: Wanted 409 deck plate

Post by ec1 »

I have a couple chunks out of an old torque plate you can borrow if need be. If I remember right they are the end pieces cut off from a 409 plate that I used on a MEL ford Big block which has the 10 degree decks like a 409. It was basically a way to clamp to the top of the block with floating head Rottler boring bar. I can send pics if needed.
Post Reply