WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

Post by ProPower engines »

Looking to replace some BHJ lifter true stuff some one used incorrectly

I need the center bar for the cam tunnel the riser plates for the ends and the reamer alignment plate.
Any leads to misc bits and pieces would be greatly appreciated.

willing to swap some BB Mopar fixture plates if someone wants to trade that has extras of BBC stuff

PM me

Dave
Real Race Cars Don't Have Doors
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

Post by ProPower engines »

STILL LOOKING AND STILL NEEDING
If anyone has some they are not using any longer I am going to order new in the 1st of the new year.
If anyone has any extra BHJ ad on stuff for BBC engines for the lifter true set up let me know.
I have a bunch of marine work in the early new year and have to order new if none can be located

PM me with details

Dave
Real Race Cars Don't Have Doors
bubbabbc
Pro
Pro
Posts: 256
Joined: Sun Dec 23, 2007 9:22 am
Location:

Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

Post by bubbabbc »

ProPower engines wrote: Thu Jan 26, 2017 1:27 am Looking to replace some BHJ lifter true stuff some one used incorrectly

I need the center bar for the cam tunnel the riser plates for the ends and the reamer alignment plate.
Any leads to misc bits and pieces would be greatly appreciated.

willing to swap some BB Mopar fixture plates if someone wants to trade that has extras of BBC stuff

PM me

Dave What BB Mopar fixture plates do you have?

Skip
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

Post by ProPower engines »

I have some doubles of various BB mopar bore true stuff
I will check and see what I got left and get back to you over the holidays
Real Race Cars Don't Have Doors
bubbabbc
Pro
Pro
Posts: 256
Joined: Sun Dec 23, 2007 9:22 am
Location:

Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

Post by bubbabbc »

Ok, thanks. PM me or (315) 343-6030.
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

Post by ProPower engines »

Still looking.
If anyone has anything nows the time to speak up before I order from BHJ #-o
Got to get it coming by this week if there is anything available.

Dave
Real Race Cars Don't Have Doors
R.Brown
Pro
Pro
Posts: 325
Joined: Wed Sep 15, 2004 7:16 pm
Location: Alberta, Canada
Contact:

Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

Post by R.Brown »

Just checked in, pretty sure I know where some is.
SBC bar, end plates, might be SBD also... not sure about cutter tooling as they may use that in the CNC... email me if still looking Dave,

rbperf at Hotmail dot com
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate

Post by ProPower engines »

Thanks Ryan
Check your in box.
I will wait to here back regarding the tooling

Thanks again

Dave C
Real Race Cars Don't Have Doors
Post Reply