Page 1 of 1

Wanted: VGS 20 Parts

Posted: Tue Nov 07, 2017 3:31 pm
by cnsperf
I am looking to update my Tobin Arp VGS 20000 to use the later design head clamping rollover fixture. If anyone has some parts/pieces just laying around please contact me as I may be interested in purchasing them.

Also, if you know of any manufacturers/dealers that may offer parts for these machines please let me know that also.

Thanks in advance.

Chris

Re: Wanted: VGS 20 Parts

Posted: Tue Nov 07, 2017 5:44 pm
by ProPower engines
There is several rollover fixtures out there but there is a guy in Iowa that builds custom fixtures.
Kevin Taylor enterprizes I have had him build stuff for me over the years to fill the gap between what BHJ has and what is needed to do some custom work that BHJ stuff does not do right.

Give him a call and see what he can do. this is a system that will be a bit costly as any VGs machine that's up for parts just for the head fixture will be a bit more then what you may want to adapt to a TA machine.

He is a good guy to work with and vary fair in cost :D

Re: Wanted: VGS 20 Parts

Posted: Tue Nov 07, 2017 5:46 pm
by mitch
viewtopic.php?f=32&t=38032

I made these if this is what you are looking for
Mitch

Re: Wanted: VGS 20 Parts

Posted: Tue Nov 07, 2017 5:59 pm
by PackardV8
cnsperf wrote:
Tue Nov 07, 2017 3:31 pm
I am looking to update my Tobin Arp VGS 20000 to use the later design head clamping rollover fixture. If anyone has some parts/pieces just laying around please contact me as I may be interested in purchasing them.

Also, if you know of any manufacturers/dealers that may offer parts for these machines please let me know that also.

Thanks in advance.

Chris
Can you post a photo of what you have now?

Re: Wanted: VGS 20 Parts

Posted: Tue Nov 07, 2017 9:19 pm
by cnsperf
PackardV8 wrote:
Tue Nov 07, 2017 5:59 pm
cnsperf wrote:
Tue Nov 07, 2017 3:31 pm
I am looking to update my Tobin Arp VGS 20000 to use the later design head clamping rollover fixture. If anyone has some parts/pieces just laying around please contact me as I may be interested in purchasing them.

Also, if you know of any manufacturers/dealers that may offer parts for these machines please let me know that also.

Thanks in advance.

Chris
Can you post a photo of what you have now?
I will try and get a picture tomorrow and post it.
Chris

Re: Wanted: VGS 20 Parts

Posted: Wed Nov 08, 2017 7:03 am
by cnsperf
This is what I currently have. I can probably make a clamp that will bolt to the existing rotating part, just thought it would be a time saver if someone had one I could purchase instead.
VGS head cradle 2.jpg
VGS head cradle 2.jpg (95.69 KiB) Viewed 192 times
VGS head cradle 1.jpg
VGS head cradle 1.jpg (102.28 KiB) Viewed 192 times

Re: Wanted: VGS 20 Parts

Posted: Wed Nov 08, 2017 9:07 am
by mitch
Thats what I had on mine if you look thru that link I posted it shows the ones I made. I does make mounting quicker an easier
Mitch