Wanted to buy: Sunnen 10RY-2100F Line Hone Mandrel for honing crank bore diameters 2.100" through 2.400"
Needs to be in "reasonable" condition. I would purchase a unit that needs everything, for the right price.
847-507-7014 Mark
Wanted: Sunnen 10RY-2100F Line Hone Mandrel
Moderator: Team
-
- New Member
- Posts: 28
- Joined: Mon Dec 30, 2013 6:33 am
- Location: Just beneath the "cheddar curtain"
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Wanted: Sunnen 10RY-2100F Line Hone Mandrel
There is several machine shop equipment dealers on ebay that have a few available. You will be surprised what is out there on ebay for sale.
A loaded 10 RY mandrel seems to sell for between $1500 and $2000 with fresh shoes and stones.
They are thew most popular mandrel and highly sought after but they are out there but not much chance in getting a mandrel for less then mentioned.
Try Farris equipment in Texas or you can call Jamison equip. in Iowa Cavco sales in Kansas or Joe Baker equip. in Ohio
One of them should be able to help out.
Good luck in your search
A loaded 10 RY mandrel seems to sell for between $1500 and $2000 with fresh shoes and stones.
They are thew most popular mandrel and highly sought after but they are out there but not much chance in getting a mandrel for less then mentioned.
Try Farris equipment in Texas or you can call Jamison equip. in Iowa Cavco sales in Kansas or Joe Baker equip. in Ohio
One of them should be able to help out.
Good luck in your search
Real Race Cars Don't Have Doors