Extremely versatile small table that I've done many different engines and cylinders on. The round bar is for mounting outboard blocks. I've done inline outboards, V outboards, any and all single cylinders, Harley's, lots of regular inline 4's, even one cylinder on a 6 cyl Jag that had a siezed head stud that interfered with the deck mounted boring bar. Table is bolted to a cart so it can be wheeled out of the way when not in use. The FN boring bar is NOT included. This could be crated on a skid to ship but I'd rather have it picked up. Located in Danville Virginia. $500.
small engine/cylinder boring table
Moderator: Team
-
- Guru
- Posts: 1564
- Joined: Thu Sep 16, 2010 10:01 am
- Location: Virginia
- Contact:
small engine/cylinder boring table
You do not have the required permissions to view the files attached to this post.
"do it right or do it right away"
http://www.motionmachineinc.com/
https://www.youtube.com/watch?v=ZgIZbveknDs
http://www.motionmachineinc.com/
https://www.youtube.com/watch?v=ZgIZbveknDs