Rottler F68A line bore tooling

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Bossman
Member
Member
Posts: 104
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Rottler F68A line bore tooling

Post by Bossman »

Wanted line bore leveling table and the right angle line bore fixture to fit a F68A machine. Also wanted a performance block fixture
Bossman
Member
Member
Posts: 104
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Re: Rottler F68A line bore tooling

Post by Bossman »

Bought the leveling table and r/ angle drive from Rottler 4 months ago still haven't recieved the correct items. for our F68A machine thinking about what it cost still hurts ouch but i am still in need of the performance fixture
Bossman
Member
Member
Posts: 104
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Re: Rottler F68A line bore tooling

Post by Bossman »

Bossman wrote: Sat Nov 14, 2020 4:50 pm Bought the leveling table and r/ angle drive from Rottler 4 months ago still haven't recieved the correct items. for our F68A machine thinking about what it cost still hurts ouch but i am still in need of the performance fixture
Still looking for this tooling it's been 8 months and Rottler still hasn't built it
MotionMachine
Guru
Guru
Posts: 1564
Joined: Thu Sep 16, 2010 10:01 am
Location: Virginia
Contact:

Re: Rottler F68A line bore tooling

Post by MotionMachine »

RMC makes their own leveling table, maybe it would work on your Rottler.
Bossman
Member
Member
Posts: 104
Joined: Sat Sep 17, 2016 12:05 pm
Location:

Re: Rottler F68A line bore tooling

Post by Bossman »

Bossman wrote: Sun Jul 01, 2018 1:18 pm Wanted line bore leveling table and the right angle line bore fixture to fit a F68A machine. Also wanted a performance block fixture

Got what i needed disregard post
Post Reply