WTB - BHJ SBC Lifter Tru Step Up Kit for 1.062 Bore
Moderator: Team
-
- Guru
- Posts: 1100
- Joined: Sun Jul 22, 2007 6:11 pm
- Location: NEBRASKA
- Contact:
WTB - BHJ SBC Lifter Tru Step Up Kit for 1.062 Bore
Anybody have a BHJ SBC Step-up Kit for the 1.062 bore size? Rent or Buy?
Nick Smithberg
http://www.smithbergracing.com
http://www.smithbergracing.com
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: WTB - BHJ SBC Lifter Tru Step Up Kit for 1.062 Bore
I was as well and it came down to cost. its not that bad to just get new from BHJ. It seems they have changed things as they went along and not all set up kits fit correctly as I found out.
Give them a call and don't forget the serial number on the end plates they need that to get you the correct pieces.
Give them a call and don't forget the serial number on the end plates they need that to get you the correct pieces.
Real Race Cars Don't Have Doors