Sunnen Hone Power Stroke MBB 1690 C

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
gofaster
HotPass
HotPass
Posts: 536
Joined: Fri Apr 15, 2005 8:21 am
Location: Indiana
Contact:

Sunnen Hone Power Stroke MBB 1690 C

Post by gofaster »

Sunnen Hone Power Stroke MBB 1690 C with complete tooling for Harley Davidson Engines

Ready to go to work, just add honing oil
The hone is loaded on a pallet and shrink wrapped, after removing honing oil and thoroughly cleaning.
I have a fork lift and can load it on your truck
This hone was used in my shop to work on motorcycle engines, primarily Harleys.
Included with the machine:
AN-600 for engine cylinders from 2.5" to 5.5"
IPL-1625 for connecting rod big end
Y20-838 for Evo tappet blocks
Y20-713 for Panhead, Shovelhead, Iron XL tappet blocks, and wrist pin bushings
ALR-720 wrist pin bushing expander
LJ-557 for Evo, Twin Cam, Panhead, Shovelhead, and Iron XL rocker arm bushings
K12-370 Panhead and Shovelhead valve guides
K8-300 for Evo, early Twin Cam, and Iron XL valve guides
K8-265 for late Twin Cam valve guides
There are a lot of stones included for the smaller mandrels.
In addition, there are other complete mandrels:
2) 5ML-906
2) 4PL-1084

There are also various power stroke attachments and the original manual
Currently wired for 220v for the main motor, and 110v for the coolant pump and work light

This machine has a single phase (household current) dual voltage motor, so you can run it on 220v or 110v with just a simple wiring switch at the motor.
The machine is located in Northwest Indiana
PM me for more pictures or information
$3800
[img]
IMG_0531.JPG
[img]
You do not have the required permissions to view the files attached to this post.
Jim McMahon
Heads1st
http://www.heads1st.com/
gofaster
HotPass
HotPass
Posts: 536
Joined: Fri Apr 15, 2005 8:21 am
Location: Indiana
Contact:

Re: Sunnen Hone Power Stroke MBB 1690 C

Post by gofaster »

Jim McMahon
Heads1st
http://www.heads1st.com/
ed nix
Member
Member
Posts: 86
Joined: Thu Feb 28, 2008 12:13 pm
Location: lawrenceburg tn 38464

cam grinder

Post by ed nix »

For sale
Nice 253 van norman cam grinder in use good shape grinds a nice cam late motors good paint.
spindle bearings replaced Call 931 762 3977 for more information,
ed nix
Member
Member
Posts: 86
Joined: Thu Feb 28, 2008 12:13 pm
Location: lawrenceburg tn 38464

Re: Sunnen Hone Power Stroke MBB 1690 C

Post by ed nix »

For sale
Nice 253 van norman cam grinder in use good shape grinds a nice cam late motors good paint.
spindle bearings replaced Call 931 762 3977 for more information,
gofaster
HotPass
HotPass
Posts: 536
Joined: Fri Apr 15, 2005 8:21 am
Location: Indiana
Contact:

Re: Sunnen Hone Power Stroke MBB 1690 C

Post by gofaster »

Price reduced to $2800.00

AN-600 mandrel was sold separately.

https://www.ebay.com/itm/Sunnen-MBB-169 ... 3181369174
Jim McMahon
Heads1st
http://www.heads1st.com/
gofaster
HotPass
HotPass
Posts: 536
Joined: Fri Apr 15, 2005 8:21 am
Location: Indiana
Contact:

Re: Sunnen Hone Power Stroke MBB 1690 C

Post by gofaster »

Sold!
Jim McMahon
Heads1st
http://www.heads1st.com/
Post Reply