Page 1 of 1

WANTED: WinDyn v1.16

Posted: Wed Aug 16, 2017 9:22 am
by DIGS
Hi,

I'm in need of a copy of WinDyn version 1.16 for our Superflow SF-901 dynometer, we have lost our installation disk and Superflow will not send us a new copy, they only want to sell us the hardware and software upgrade package to latest SF-902S dynometer and WinDyn 3.2, unfortunately this is thousands of pound we just don't have spare, and we don't really need or want to upgrade a setup that work perfectly well as it is.

So if anyone is willing to part with a copy of WinDyn 1.16 please PM me.

Best regards
Darren

Re: WANTED: WinDyn v1.16

Posted: Thu Aug 17, 2017 5:51 am
by thedynoguy
PM sent

Re: WANTED: WinDyn v1.16

Posted: Sun Sep 27, 2020 6:57 pm
by throttleman
there is a X super flow guy , john 704-957-8020 , dyno help inc thanks , thunderboatbob

Re: WANTED: WinDyn v1.16

Posted: Fri Jun 25, 2021 11:29 pm
by Mtricht
I'm also desperately seeking a copy of WinDyn 1.16 (for an SF-901). Same as with DIGS, SF is asking 30K for an upgrade instead of facilitating a vintage copy :(

I'm happy to return a favor, with any 3D CAD design of CFD analysis !

Thanks
Arnaud

Re: WANTED: WinDyn v1.16

Posted: Sat Jun 26, 2021 12:15 am
by Super_Stock
Digs, a hit and run member...one post to get the SW ..

Re: WANTED: WinDyn v1.16

Posted: Sat Jun 26, 2021 12:45 am
by Mtricht
that much for a warm welcome =D>

Re: WANTED: WinDyn v1.16

Posted: Sat Jun 26, 2021 8:49 pm
by Super_Stock
I'm talking about Digs... or DIGS... not you..Unless of coarse, you have the same plan..
Point is, if DIGS had hung around instead of raiding the ice box and hitting the road,then you could have got what you needed from him.. See how it works?
Go ahead, be a smart ass with your hand clapping, second post in, with your cap in your hand, and see how far you get.

Re: WANTED: WinDyn v1.16

Posted: Sun Jun 27, 2021 4:33 am
by Mtricht
The immediate reply I read is a message addressed to Digs, commenting that I'm supposed to be a hit run.
that hurt, and indeed with your explanation it turns it around, and then my response is annoying

I suggest we try to start again.....

We recently bought an SF 901, in rather good condition, but wihtout PC. We have a 20y/o professional workshop looking to expand pleasure and business with the dyno. I'm an angineer with 30y professional CAD design experience (in mainly automotive) and access to structural and CFD analysis software.

As already metioned I'm not looking for a freebie and am happy to share my expertise and return a favor. I would actualy enjoy sharing as anything engine related is my passion. If you or someone else is interested i'd appreciate it and we might actually have fun along the way.

Re: WANTED: WinDyn v1.16

Posted: Fri Jul 09, 2021 10:33 pm
by Charliesauto
Mtricht wrote: Sun Jun 27, 2021 4:33 am The immediate reply I read is a message addressed to Digs, commenting that I'm supposed to be a hit run.
that hurt, and indeed with your explanation it turns it around, and then my response is annoying

I suggest we try to start again.....

We recently bought an SF 901, in rather good condition, but wihtout PC. We have a 20y/o professional workshop looking to expand pleasure and business with the dyno. I'm an angineer with 30y professional CAD design experience (in mainly automotive) and access to structural and CFD analysis software.

As already metioned I'm not looking for a freebie and am happy to share my expertise and return a favor. I would actualy enjoy sharing as anything engine related is my passion. If you or someone else is interested i'd appreciate it and we might actually have fun along the way.
Do you know if your 901 previously had Windyn? If not, you will need a couple of eproms and a key installed in the big board. If you do have the eproms, they must be later configuration to run 1.16.

Good luck.

Re: WANTED: WinDyn v1.16

Posted: Tue Sep 07, 2021 7:42 am
by Mtricht
I'm told it ran on a windows version. I'm assuming 1.16 will work.
Do you or anyone else know if a simple zip/copy of the WinDyn installation folder will work on another computer ?

Re: WANTED: WinDyn v1.16

Posted: Thu Sep 09, 2021 3:09 pm
by dieknow
Like Charlie said.. check to see which eeproms you have in U20 and U21. Either way we should be able to get you set up.

Re: WANTED: WinDyn v1.16

Posted: Sat Sep 11, 2021 1:52 pm
by Mtricht
thank you Dieknow
I'll make new pictures on sunday and let you know !

Re: WANTED: WinDyn v1.16

Posted: Mon Sep 13, 2021 8:49 am
by Mtricht
here is a close up of U20 & U21
http://vdveerdonk.com/images/u20u21.jpg
is that sufficient ?