motown intake sbc
Moderator: Team
motown intake sbc
anybody run this intake on a real street car, its gonna be on a heavy 79z28, just wondering if it really has any low end torque on a 355,its a #061040
http://www.worldcastings.com/products/m ... folds.html
http://www.worldcastings.com/products/m ... folds.html
dan garfield
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Re: motown intake sbc
That is a tough one.fast79z wrote:anybody run this intake on a real street car, its gonna be on a heavy 79z28, just wondering if it really has any low end torque on a 355,its a #061040
http://www.worldcastings.com/products/m ... folds.html
You have not given any info but a 355????
GURU is only a name.
Adam
Adam
-
- Guru
- Posts: 1100
- Joined: Sun Jul 22, 2007 6:11 pm
- Location: NEBRASKA
- Contact:
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Dan, What does low end mean to you? Not beeing a smart arse just wondering with the combo you posted?fast79z wrote:355 sbc
10.5:1
6" rod
comp solid STREET roller 242/248 579/585 108lsa
afr 195 COMP eliminators
quick fuel 750 anular q series carb
hooker 1.3/4 super comps
yank 3500 stall
373 gear
325/50/15 drag radial
heavy 79 z28
GURU is only a name.
Adam
Adam
- jmarkaudio
- Vendor
- Posts: 4222
- Joined: Wed Sep 26, 2007 11:26 am
- Location: Florida
was just wondering that myself, been on the phone with a few people,that can do some work on it to pull[make power] to 68-7000, that would be fine, its very important to keep the throttle response really crisp thats` why i didnt want a ton of duration on the cam,trying to have my cake and eat it too!
dan garfield
Motown Intake
We have had good results with Motown on 400-434 cu-in. On a street ,low comp 355 in a heavy car a RPM air gap or a small single plane would be a better choice.We have a customer with a 10.0 cr 406 in a 67 chevelle at 3500# it has run 10.77 with 93 octane and the motown manifold.Bill C.
that particular 355 was 6 inch rod je forged pistons about 11.5 to 1 comp afr 195 heads from 1998 vintage, baby solid roller 236 at 50 640 lift with 1.6 roller rockers it was in my 85 vette so it was a fuel injected by way of a converted sigle plane intake thst was a brodix hv1001 with a 1300 cfm mono blade throtle body 24 lb injectors i shifted at 7200 rpm the car weghed with me in ti 3350 lbit had a 700 r4 trans and a 10 inch converter with only 3.54 gears its best was a 10.79 but let me say this on a fuel injection car you can not over manifold or throtle body it is because the injectors are shooting fuel directly at the valves
PIC OF CAMARO http://www.smugmug.com/gallery/5392657_US4EK#330124540_9jtuK
video of run
http://s8.photobucket.com/albums/a26/vet85us/Drag%20Racing%20Videos/?action=view¤t=Cork10_79-1.flv&refPage=&imgAnch=imgAnch6
video of run
http://s8.photobucket.com/albums/a26/vet85us/Drag%20Racing%20Videos/?action=view¤t=Cork10_79-1.flv&refPage=&imgAnch=imgAnch6